HOWTO make a coatrack out of a baby doll

Here's a nice use for an unloved plastic dollie: a coatrack!

1. Dismember your doll

2. Arrange hands and feet on board in an order you like. Space them evenly apart, marking their positions with a pen or pencil. Set limbs aside.

3. Drill 3 holes per limb. I counter sank the holes so the board would lie flat against the wall. Make sure your holes will not come too close to the edge of the limb, because the screw make poke out of the side of a hand or foot.

4. Position keyhole hanger and mark the spot. Chisel out the wood until the hanger fits snugly and until the drywall screws' heads fit.

Link

(via Craft)