Unintentionally funny video instructions for factory resetting GE light bulbs

Use the first reset sequence if:

Your bulbs are running on firmware version 2.8 or later (you can find your bulb firmware version by tapping on the device in your C by GE app).

We recommend counting with Mississippi (1 Mississippi, 2 Mississippi, 3 Mississippi, etc.).

Start with your bulb off for at least 5 seconds. 1. Turn on for 8 seconds 2. Turn off for 2 seconds 3. Turn on for 8 seconds 4. Turn off for 2 seconds 5. Turn on for 8 seconds 6. Turn off for 2 seconds 7. Turn on for 8 seconds 8. Turn off for 2 seconds 9. Turn on for 8 seconds 10. Turn off for 2 seconds 11. Turn on Bulb will flash on and off 3 times if it has been successfully reset.

If the factory reset above was unsuccessful, you might have an older version of the C by GE bulb. Please follow the instructions below to reset.

Bulb Reset Sequence – for firmware version 2.7 or earlier: We recommend counting with Mississippi (1 Mississippi, 2 Mississippi, 3 Mississippi, etc.).

Start with your bulb off for at least 5 seconds. 1. Turn on for 8 seconds 2. Turn off for 2 seconds 3. Turn on for 2 seconds 4. Power off for 2 seconds 5. Turn on for 2 seconds 6. Power off for 2 seconds 7. Turn on for 2 seconds 8. Power off for 2 seconds 9. Turn on for 8 seconds 10. Power off for 2 seconds 11. Read the rest

iRuler is a website that turns your screen into an inaccurate ruler

iRuler.net detects the dimensions and resolution of your display and then displays a rule upon it. In the photo above, I've placed a real ruler on the screen (above) to verify the accuracy of the iRuler (below). Good enough for me! Read the rest